We undertake soils and stabilised soils testing for the construction and geotechnical industries. Take a look below at the types of tests we offer from our central laboratory and on your site to help with assessing ground strength, density and classification
Ground Strength Testing
Triaxial Testing
Shear strength on undisturbed or remoulded samples... more
Density & Compaction Testing
Insitu Density using Core Cutter
Density tests on site for clays... more
Insitu Density using Sand Cone
Density tests on site for all soil types
MCV Testing
MCV testing to assess moisture state of soils used in earthworks
Non-nuclear Insitu Density Testing
Instant percentage compaction test results
Target Density
Lab Target density to compare in-situ density too
Laboratory CBR Testing
For determination of CBR values on remoulded material
Insitu Density using Core Cutter
Density tests on site for clays
Insitu Density using Sand Cone
Density tests on site for all soil types
MCV Testing
MCV testing to assess moisture state of soils used in earthworks
Non-nuclear Insitu Density Testing
Instant percentage compaction test results
Target Density
Lab Target density to compare in-situ density too
Classification Testing
Moisture Content
The cornerstone test for soil assessment
Particle Size by Sieving
For particle sizes from 125mm to 0.063mm
Swelling Testing
Swelling under lab conditions for CBR specimens
Hydrometer Analysis
For silt and clay percentage measurements
Plasticity Index Testing
Liquid limit, plastic limit and plasticity index classification
Particle Density
Moisture Content
The cornerstone test for soil assessment
Particle Size by Sieving
For particle sizes from 125mm to 0.063mm
Swelling Testing
Swelling under lab conditions for CBR specimens
Hydrometer Analysis
For silt and clay percentage measurements
Plasticity Index Testing
Liquid limit, plastic limit and plasticity index classification
